Every manufacturer must ensure that their product is electrically and electronically compatible. This means that the appliance or device will not be affected by other electronic devices during its operation. In turn, the device should not interfere with other devices. At the start of a new development, an EMC plan must already be drawn up and it is also checked which standards the new device must meet.
Available Equipment
-
Antenna
Model: S30280 Broad Band Antenna
Part Nr: 9HS30280
Ser Nr: 022BT03
Frequency range | 30 – 1000MHz |
Accuracy | +/- 5dB |
Impedance | 50 ohm |
VSWR | 3 : 1 |
Polarisation | manually set to vertical and horizontal |
-
Spectrum Analyser
Model : Real time Spectrum analyser RSA3015E-TG
Ser Nr : RSA3H214500122
Frequency range | up to 1.5 GHz |
Average noise level (DANL) | < 161dBm |
Phase noise | < 102Dbc/Hz |
Measurement uncertainty | < 1.0dB |
Tracking generator | 1.5 GHz |
Min. RBW | 1Hz |
-
Burst Generator
Model: BG2-MKII + ISN340 (3-Phase Coupling Network)
-
Near-field Probe Set
Model: 7405
-
Line Impedance Stabilisation Network
Model : LSN0930A
Frequency range | 9kHz – 30MHz |
Filter network | Designed to meet CISPR16 for Band A and Band B |
RF output | 50 ohm |
Artificial hand | Network meets EN55014 |
-
Software
Possible EMC pre-compliance tests
-
Radiated emission test
-
Conducted emission test
-
ESD immunity test
Contact discharge from 0.5kV to 8kV
Automatic testing
-
BURST immunity test
Repetition from 0.01s to 5s
Duration 1ms to 15ms
225V to 4.4 kV
Automatic tests on network cables